Circuito electronico con intermitencia rojo y azul
Codigo:    [ CIRCUITO INTERMITENTE ]


click sobre la imagen para ampliar y ver mas fotos

Circuito electronico con intermitencia rojo y azul
Codigo:    [ CIRCUITO INTERMITENTE ]

Producto 11 de 13
Categoria ELECTRONICA

Disponible
+ de 5 unidades
+ de 5 unidades

12,00eur.
cantidad :

Producto vistado 2984 veces.
Atrás
Circuito electronico con intermitencia rojo y azul tipo Policia

  • Este circuito se puede suministrar montado o por componentes
  • Precio del circuito montado: 12 euros
  • Precio del circuito por componentes: 10 euros
  • This suite adopts simulation light circuit made with NE555 and CD4017
  • the blue LED and red LED flashed alternately according to the pulse.
  • The multivibrator composed of NE555 will have a certain frequency of oscillation signal
  • send to CD4017 decimal counter/pulse distributor,in order to count. When the 1,3,5
  • pulses arrive Q0,Q2,Q4 output high level in turn,blue LED flashes 3 times,Q5,Q7,Q9
  • output high level in turn.Red LED flashes 3 times,blue LED flashes again when
  • 11,13,15 pulses come,blue and red LED flashes alternately circulatory, so as to like
  • the alarm lamp.Change the RP1 size can change the oscillation period, thus
  • changing the LED shining speed, the whole circuit DC9-12V can be worked.
  • Red flashing light and blue flashing light form a board separately, connected with the
  • main board through the stamp hole.If you need to install to other place separately or
  • increase the distance,you should cut off through the stamp hole,then connect with the
  • mother board by two wires.
  • Please pay attention to the direction of LED when installing,especially the direction of
  • L11 and L12.The R2 and R3 controls with the brightness of light,you can change it appropriately ,the range is 10-100 ohm.
Fabricantes